Readers like you help support MUO. When you make a purchase using links on our site, we may earn an affiliate commission. Read More.

I have one little problem in my office. Inside office i have network with 6 PCs and 6 laptops. Now the problem is when I connect wireless router linksys wrt120n to the network, clients (laptops) can't see PCs in the network. Laptops have access to internet. What is solution for this issue?wrt120n use 192.168.1.x while network is on 192.168.20.x Should I buy new equipment or can I configure router and how? Please help.

 

Uchitha Jayathissa
MAKEUSEOF VIDEO OF THE DAY
SCROLL TO CONTINUE WITH CONTENT
2013-04-04 09:33:32
Are you using windows7/any window OS, then Go to your network settings and make it a work or home network. I have experianced that if the network is public then can't use Netbios Name for other PCs. normally by default its connecting as public network.
ha14
2013-04-04 08:24:07
enable Internet Control Message Protocol (ICMP)http://technet.microsoft.com/en-us/library/cc738771(v=ws.10).aspxdisable firewallbe sure that they are all on the same local network
Vishal S
2013-04-04 08:21:23
use a server 2007 or team viewer and follow steps correctly
susendeep dutta
2013-04-04 07:53:06
One basic thing you need to make sure that all these computers and laptops have to be in same HOMEGROUP.See more information below -http://helpdeskgeek.com/windows-7/windows-7-cannot-connect-to-homegroup/
Bruce Epper
2013-04-04 05:20:11
By default, most routers have NAT enabled by default. If the router the laptops are connecting to is sitting behind another router, you have a double NAT situation. You can fix this by disabling NAT on the internal (wireless) router.
Michael Heffner
2013-04-03 23:47:52
You need to manually configure a route on the routers to each other. What you've setup is a double NAT situation.