Thanks to loads of informative written, picture, and video tutorials on the internet today, you no longer need an IT degree to know about tech. The best part? You can try out these tutorials to learn how tech works practically.

Check out these seven DIY projects that will help you learn more about tech.

1. Raspberry Pi Retro Gaming Table

Raspberry Pi is a scaled-down, single-board computer that has since evolved into one of the most popular and coolest tech gadgets across DIY circles and has been used to create a ton of fantastic, highly functional DIY projects. A DIY Raspberry Pi retro gaming table will not only allow the pleasure of playing arcade from your home’s comfort, but it’s also a chance to learn how Raspberry Pi works.

After the display is installed, you can move onto installing RetroPie on the Raspberry Pi, install and configure your games, prototype the table and finally add your joysticks and wire the set up for a clean look.

Related: Best Raspberry Pi Projects for Beginners

2. Build Your Own Computer

Never really had a chance to familiarize with the hardware parts of a computer? If so, taking on this DIY project will teach you a lot about computers and how each component works. As a result, you’ll quickly troubleshoot problems and custom create a PC with the functionality you need.

All you need to do is get PC components and a quality PC case (you can customize a creative and low-budget PC case easily) to house everything.

3. Build a Raspberry Pi Arcade Cabinet

If you prefer arcade cabinets over tables, you’ll be glad to know the DIY process for the two is almost similar, only that you’ll need to design a cabinet, and you’ll need a smaller 24inch screen. And because the design is different, the dimensions for the plexiglass will also change.

Related: How to Install an Operating System on Raspberry Pi

Put everything together, build, program Raspberry Pi and enjoy playing arcade right from the comfort of your home.

4. Roll Your Own VPN Using a Raspberry Pi and OpenVPN

If you’re always working from coffee shops, cafes, or any other place you don’t trust, a VPN is the easiest way to protect your data from prying eyes. Now, you can pay for a commercial one or roll your own for less money while learning how virtual private networks, as well as Raspberry Pi, work.

You’ll need a Raspberry Pi or later model, 8GB MicroSD, SD card reader, 5V USB power cable, HDMI, USB keyboard, and an Ethernet network cable.

Related: Built a Raspberry Pi VPN-Secured Travel Router

To install it on the Pi, you’ll need to first download and copy it on the SD card, insert the card into the Pi, and copy the relevant files. Now, change the default password for your home network, and then assign your RPi a static address. Update Raspberry Pi and then run the code to complete your DIY VPN. You can use it from virtually anywhere in the world.

5. Build a Streaming Dashcam

A dashcam is an excellent car accessory. It captures everything in real-time, allowing you to revisit those memorable moments on the road. It is an excellent source of evidence should you be involved in or witness an accident.

But while beneficial, dashcams can be expensive. Building your own helps cut on costs and is a chance to learn how various components of a camera work to create quality video footage. What’s even better is that this project is straightforward.

It runs on Raspberry Pi Zero and requires two cameras (a front and rear-facing one) to capture footage and GPS to capture the location. You’ll also need a switch to turn it on and off, and status LED indicators to track performance.

6. Add Wi-Fi to DSLR Camera

Capturing images and video footage using a DSLR camera is all fun and games until you have to manually select and transfer them to your PC and other devices. You don’t have to ditch your old DSLR away yet, as you can add Wi-Fi in two easy ways.

You can either use a Wi-Fi-enabled SD card or a third-party adapter. To use an SD card, ensure your camera is compatible and download a relevant app. Type in the activation code on the SD card and leave the app open so all your images and footage are automatically transferred to the appropriate devices.

If your DSLR isn’t SD-compatible, shop around for either a manufacturer or a third-party adapter, plug it into your DSLRs USB slot, and pair it with other devices through network settings, and voila! You’ll have a fully functional, Wi-Fi-enabled DSLR camera without breaking the bank.

7. Build a Home Theatre PC

Also known as HTPC, a Home theatre PC integrates with your home theater system, creating a harmonious, easy to control media center. Must-have items for this project include a fast processor for seamless performance, at least 2GB RAM, a 200GB hard drive, a high-quality audio card, CD-ROM drive, an appropriate OS, software to play and record content, and lastly, a remote control.

While choosing components, keep the following pointers in mind:

  • Opt for a low thermal design power (TDP) processor
  • The motherboard determines the size of the case you’ll need, so choose wisely
  • Although you can use HDD, a solid-state drive will make your Home theatre PC faster

To get it up and running, set up your OS, chosen media center software, and all the devices you want to integrate into your home theater system.

Related: How to Build a Great Media Center PC

Get Started to Better Your Tech Knowledge

Even though doing it yourself isn’t the easiest way to learn tech, it’s practical, informative, and rewarding. Some of the DIY projects above might be a little technical but most rewarding when complete. Try them out to better your tech knowledge in various areas.