Can PCB of any makework as replacement for original PCB in a tablet?

6 answers Comments are Closed

1. Hovsep A

   January 28, 2014 at 4:35 pm

   you can try, but you will need the right drivers and hardware compatibility
   • Drsunil V

     January 29, 2014 at 5:05 am

     Thanks. Please tell , How to know compatibility model
   • Drsunil V

     January 31, 2014 at 5:18 pm

     hi. Please tell how to know PCB model number for a particular tablet. And can a same model number be of multiple brands?
   • Hovsep A

     January 31, 2014 at 10:22 pm

     you can open the tablet and check numbers....
     i think you will need to replace touchscreen printed circuit board along with this digitizer, the PCB should be loaded with the correct firmware to interface with the digitizer
     http://www.zeph.com/laptoprepair.htm
     you can try to root your tablet and try to get copy needed firmware to a folder
2. Oron J

   January 27, 2014 at 11:48 am

   No. Only the PC of the same make & model will work. There may be cases where odd combinations PCB and touch screen will work, but even then, the new PCB won't fit in the case of the tablet, so you will not be able to use it effectively (e.g. charge it).
   • Drsunil V

     January 29, 2014 at 5:06 am

     THanks. Please tell ebay.in or similar mall weblink of compatible model for HCL ME AM7A1