GaabbyMariex3 asks:
Last night I was trying to download Android Cyanogenmod 9 to my HP Touchpad and it failed. I pulled the USB cable out of my TouchPad and a big white USB picture appears on the screen and the tablet would not turn off, so I forced it to shut down. Now when I plug it into the charger the charging symbol does not show up. Also, when plug it into my computer it is detected, but otherwise does not do anything. How can I fix my tablet?
4 Answers - Write an Answer
ha14
February 18, 2013Hold down the restart button and the home button at the same time for a while.
use webOS doctor to reinstall webOS
http://theunlockr.com/2011/10/18/how-to-reinstall-webos-on-the-hp-touchpad/
then you can try to reinstall Android Cyanogenmod 9
[Guide] Factory condition restoration / Downgrade to webOS 3.0.0
http://forum.xda-developers.com/showthread.php?t=1426244
Imesh Chandrasiri
February 19, 2013Try resetting the device! I hope you haven’t bricked the device! :O
John P
February 19, 2013As per chicle_11…
Read this thread : http://forum.xda-developers.com/show…426244&page=12
Pay special attention to page 12. It will show you how to do it without using novaterm. Also towards the beginning of the process you’ll get asked a lot of questions, just answer yes to all.
Good luck.
Hold power and volume up at the same time, this will get you into correct mode (recovery).
Edit : plug your tablet in for a few hours before trying the process.
the link is broken, try to report it again or shorten url link if it is to big to be displayed correctly.
February 22, 2013http://tinyurl.com/
John P
February 25, 2013http://bit.ly/YvfX0O
As per Chicle_11
Pay special attention to page 12. It will show you how to do it without using novaterm. Also towards the beginning of the process you’ll get asked a lot of questions, just answer yes to all.
Good luck.
Hold power and volume up at the same time, this will get you into correct mode (recovery).
Edit : plug your tablet in for a few hours before trying the process.