How can I recover my Samsung Corby S3653 phone which died during an upgrade?

tushar konde November 18, 2011
Pinterest Stumbleupon Whatsapp

I was upgrading my Samsung Corby s3653. While upgrading I got flash error, then I removed USB cable and restarted my cell, but it’s dead. It’s not going to download mode also. Gow can I flash it again?

  1. ilyas
    June 18, 2012 at 5:32 pm

    but i unable to download rsrc1 boot apps etc . from where i can download it

    • Susendeep Dutta
      July 10, 2012 at 11:20 am

      These files will be downloaded automatically by the software.Did you kept Rsrc1 boxe ticked?

  2. ilyas
    June 18, 2012 at 5:31 pm

    but where these files are available rsrc1 apps boot etc

  3. Geeth Sang
    June 7, 2012 at 8:35 am

    Thankyou sooooo much..........;))

  4. kevin
    June 5, 2012 at 12:58 pm

    but my fon will not turn into download mode.. its really dead.. what will i do?

    • ha14
      June 6, 2012 at 8:59 pm

      try to hard reset
      Secret Code for Samsung Corby
      http://vinaytechs.blogspot.fr/2010/02/secret-code-for-samsung-corby.html

    • Susendeep Dutta
      June 7, 2012 at 6:48 am

      Did you tried the method mentioned above?

    • Trick Anteola
      July 9, 2012 at 11:44 am

      my gt-3850 doest not turn to download mode help me plz...........
      what will i do..?????????
      help plz

      • Susendeep Dutta
        July 10, 2012 at 11:17 am

        Press Volume Down,Camera button,Power button.Something red coloured text will appear.This will enetr your phone into download mode.

        • Trick Anteola
          July 10, 2012 at 11:29 am

          when i Press Volume Down,Camera button,Power button, my phone has no response what else can i do..?

        • Susendeep Dutta
          July 10, 2012 at 1:36 pm

          Try pressing Volume up and power button.

  5. Ramireznikki98
    February 1, 2012 at 8:39 am

    but my fon will not turn into download mode.. its really dead.. what will i do?

  6. ronan
    December 19, 2011 at 8:51 am

    thank you very much Susendeep Dutta.!

  7. Susendeep Dutta
    November 19, 2011 at 5:30 am

    Download the firmware for your phone on your PC and thoroughly scan it for any viruses,malware using Avast or Microsoft security essentials or any better antivirus software -

    http://rapidshare.com/files/310984933/S3650XXII5.rar

    Download MultiLoader_V5.60 and install it on PC -
    (Click on Download Now button)

    http://www.4shared.com/file/Q5u9R8ah/MultiLoader_V560.html

    Download and read the PDF tutorial for performing flashing of firmware of your phone -
    (Click on Download Now button)

    http://www.4shared.com/document/wb3hmLtp/S3650_Flash_Tutorial_English.html

    If you are not able to understand mentioned steps in PDF tutorialor it doesn't works for you, try the following steps -

    1.Press the following buttons - Volume Down,Camera button,Power button.Something red coloured text will appear.

    2.Connect your phone to PC and open MultiLoader 5.6.3.Select the option BRCM2133.

    4.Tick on Full Download,Master Rom boxes (see the image below as attachments).

    5.Tick the check boxes - Boot, Apps, Rsrc1, Rsrc2, Factory FS.6.Click on port search,Download buttons below.7.Allow it to download all the files.

    8.Disconnect your phone from PC,remove the battery,SIM,Micro SD card and reinsert them.Switch on your Phone.

    This must restore your phone to its original state.

    • GEETH
      June 7, 2012 at 8:14 am

      thankyou so much .....................god bless u... :))))

Ads by Google